Hella Marine EuroLED 115 Downlight With Switch

The Hella Marine EuroLED 115 Downlight with Switch
provide a viable alternative to 20W incandescent lamps and offer
substantial energy saving on board. Designed and manufactured in
New Zealand, EuroLED 115mm LED downlights provide wide spread
illumination with class leading colour rendering and interior
enhancing colour temperatures in white (5000K) or warm white
(3000K). Power consumption is less than 4.5W per lamp (less than
[email protected]/ [email protected]) offering substantial power saving and heat
reduction onboard compared to incandescent lighting.

Hella Marine EuroLED 115 Downlight with Switch
requires no remote drivers or control wires, simply connect the
positive and negative cables to 12V or 24V DC systems. Each lamp
operates on an input voltage between 10-33V DC and can also be
fully dimmed and controlled via PWM based products such as the
Hella marine 2 Group Light Dimmer (5XA 998 572-001). Hella marine
LED downlights represent the very latest in class leading energy
efficiency and maintenance free fit and forget technology.

Hella Marine EuroLED 115 Downlight with
Switch Features:

• Internal Multivolt electronics provide robust reverse polarity,
  spoke and over-voltage protection for ongoing reliability
• Can be installed almost anywhere onboard, interior or exterior,
  wet or dry
• The low heat signature will not cause damage to surrounding
  materials
• Supplied with a spacer ring, can be surface or recessed mounted
  making
• Compatible with a broad range of applications and
  installations
• ON/OFF rocker switch integrated into the side of the
  housing
• Maintenance free fit and forget technology

Hella Marine EuroLED 115 Downlight with
Switch Specifications:

• Lens Material: UV resistant enhanced impact acrylic
• Rim Material: UV resistant plastic. 316 stainless
  steel.
• Colour Temperature: 5000K (White)
• Dimming: PWM. eg Via to Hella marine 5XA 998 572-001
• Cable: Pre-wired with 500mm twin core marine cable
• Operating Voltage: 10-33V DC
• Power Consumption: less than 4.5W ( less than 0.37A @ 12V /
  0.18A @ 24V )
• Degree of Protection: IP 67 – Completely sealed
• Weight: 170g (including cable)
• Installation: Recess into 90mm cutout. Surface mount via
  spacer
• Approvals: CE
• Manufacturing Location: New Zealand