Hella Marine White LED Easy Fit Gen 2 Step Lamp

Set and forget

The White LED Easy Fit Gen 2 Step Lamp offers
attractive and timeless LED courtesy lighting for a wide variety of
interior and exterior lighting applications. Light is radiated
downward at an angle of 30 degrees making these lamps ideal for
illuminating on board areas such as steps, stairs, toe kicks,
storage areas, companion ways, deck fittings, signs and
switches.

Multivolt electronics ensure constant light output in 12V or 24V DC
systems. Easy Fit series lamps are completely sealed, shock and
vibration resistant and represent reliable ‘fit and forget’
technology.

Gen 2
The new Easy Fit features a new design incorporating new
electronics and LED technology. Size is still the same but the
mounting method has changed slightly. The Gen 2 features better
light output, modern surface mount LED design and clip-on cover.
These improvements allow for reduced power consumption, increased
efficiency and reduction of potential water ingress.

White LED Easy Fit Gen 2 Step Lamp Features:

• Significant power savings
• Precision optics
• Glare diffusion
• LED technology and efficiency
• Outstanding durability
• Waterproof, impact and shock resistance
• Multivolt circuitry for consistent illumination across a range
  of input voltages, even under severe voltage fluctuations

White LED Easy Fit Gen 2 Step Lamp
Specifications:

• Lens Material: UV resistant enhanced impact acrylic
• Cap Material: White plastic, chrome plated plastic, polished
  316 stainless steel
• Cable: Pre-wired with 100mm marine cable
• Voltage: Multivolt for optimum brightness in 12 and 24 volt
  systems
• Power Consumption: 0.5W ( < [email protected] / < [email protected]
  )
• Degree of Protection: IP67 – Completely Sealed
• Weight: Stainless Cap – 30g (Including cable) Plastic Cap – 15g
  (Including cable)
• Approvals: CE, RCM

Note: Gen 2 Easy Fit lamps no longer have the
two open slots for mounting the original caps. This improves water
tightness when installed in wet areas like cockpits. Each lamp is
pre-wired with 100mm of marine cable and supplied with stainless
steel screws. Optic appears clear until illuminated.